Avsl Adastra DM25 Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Avsl Adastra DM25 herunter. Avsl Adastra DM25 9 Seiten. Compact 100v mixer-amplifiers
Auch für Avsl Adastra DM25: Benutzerhandbuch (9 seiten)

Seite drucken

Front panel

Rear panel

Connection and setup

Connect the rear IEC inlet (17) to the mains using the supplied mains lead (or an equivalent

approved type). Ensure that the mains voltage is correct and that the mains outlet is switched on.

Connect any line level audio inputs to the Aux input (12) on the rear panel using RCA leads.

Connect a microphone (if required) to the front panel jack input (10).

Further amplifiers can be connected from the rear Out RCA sockets (11).

The DM series amplifiers can be used either with 100V line or standard low impedance speakers.

These 2 configurations cannot be used together, so it is important to decide which method will be

used at the start.

Speaker connections are provided as spring terminals on the rear panel (13, 14, 15)

Wiring is described for each type of speaker system on the following page.

Next to the speaker connections is a spring terminal for FM Antenna (16)

This should be connected to the core of an antenna cable for good FM radio reception (if required)

NOTE: Do not connect a speaker output to the antenna by mistake. This may carry high voltage.

Power on/off switch

Media player display

USB media port

Media player mode & transport controls

Treble EQ

Bass EQ

Media player level

Auxiliary input level

Microphone level

10. Microphone input jack

11. Aux output connectors (RCA)

12. Aux input connectors (RCA)

13. COM speaker terminal

14. 4-16Ω speaker terminal

15. 100V speaker terminal

16. FM antenna connection

17. IEC mains inlet & fuse holder

953.108UK, 953.109UK User Manual