Allied Telesis SB244-03 Spezifikation - Seite 7

Blättern Sie online oder laden Sie pdf Spezifikation für Schalter Allied Telesis SB244-03 herunter. Allied Telesis SB244-03 8 Seiten. Allied telesis series switches data specification

Seite drucken

Patch SB244-03 For SwitchBlade 4000 Series Switches and AT-9800 Series Switches

Patch SB244-03 for Software Release 2.4.4

C613-10349-00 REV C

PCR: 02398

Module: IPV6

The following issues have been resolved:

•

It was possible to assign the same network on different IPV6 interfaces

•

The loopback address was being added to other interfaces

•

The tunnel configuration was not showing correctly in IPV6

configuration commands

•

RIPv6 now sets the metric of routes for interfaces that are DOWN to 16,

and immediately sends responses when the link status of VLAN

interfaces changes.

PCR: 02401

Module: IPV6

Neighbour discovery and PIM6 caused a fatal error when IPv6 was not

enabled, or when the IPv6 feature license was not present. This issue has

been resolved.

PCR: 02406

Module: IPV6

A Router-Alert option has been added. Also, the SHOW IPV6 MLD

INTERFACE command now works correctly.

PCR: 02407

Module: IPG

ICMP was sending too many messages back as responses to fragmented

packets. This issue has been resolved.

PCR: 02409

Module: IPG

A warning now appears when the DELETE IP INTERFACE command is

executed before the DELETE DVMRP INTERFACE command.

PCR: 02410

Module: VRRP

VRRP pre-empt mode was not working with advertisement updates of 1

second or more because this did not allow for interface start time on startup.

Now a check is made to verify that interfaces are UP before timers are

started.

PCR: 02413

Module: IPG, IPX2

Static IP ARP entries could not be added to hardware at boot time. Also, an

IPX circuit could not be deleted from hardware. These issues have been

resolved.

PCR: 02416

Module: DVMRP, IPG

Multicasting forwarding was not working correctly. This issue has been

resolved.

PCR: 02417

Module: VLAN, IPG

The IGMP port list was not updating correctly when a port went down. This

issue has been resolved.

PCR: 02418

Module: IPV6

ICMPv6 was returning an error for non-zero fragment offsets. This issue has

been resolved.

Network affecting: No