DG NVMe-IP Anleitung - Seite 12
Blättern Sie online oder laden Sie pdf Anleitung für Hauptplatine DG NVMe-IP herunter. DG NVMe-IP 18 Seiten. Linux demo
Auch für DG NVMe-IP: Demo-Anweisungen (20 seiten)
Seite druckendg_nvmeip_linux_instruction_intel_en.doc
3.3 Read SSD
Select '2' to send Read command to NVMe SSD. Three inputs are required for this menu.
1) Start LBA: Input start address of SSD in sector unit. The input is decimal unit when input
only digit number. User can add "0x" to be prefix when input is hexadecimal unit.
2) Sector Count: Input total transfer size in sector unit. The input is decimal unit when input
only digit number. User can add "0x" to be prefix when input is hexadecimal unit.
3) Test pattern: Select test pattern to verify data from SSD. Test pattern must be matched
with the test pattern which is used during write test. Five types can be selected, i.e. 32-bit
increment, 32-bit decrement, all 0, all 1, and 32-bit LFSR counter.
Similar to write test if all inputs are valid, test system will read data from SSD. Test
performance, total size, and total time usage are displayed after end of transfer. "Invalid
input" will be displayed if some input values are out-of-range.
19-Feb-18
Figure 3-9 Input and result of Read SSD menu
Page 12