CPI 1.2M Ku-BAND Tx Montageanleitung - Seite 9

Blättern Sie online oder laden Sie pdf Montageanleitung für Antenna CPI 1.2M Ku-BAND Tx herunter. CPI 1.2M Ku-BAND Tx 15 Seiten.

CPI Satcom & Antenna Technologies

CAUTION: During the assembly procedure, the sequence of instructions must

be followed. Do Not Tighten Any Hardware Until Instructed.

Refer to the parts list table and the referenced steps.

Az/El

Positioner

Mast Pipe

Reflector

Hole for

Feed Rod

Hole for

Feed Support

1.2M Ku-BAND Rx/Tx SERIES 1132

STEP 2.

Slip the Az/El Positioner (item 2) onto

the mast pipe as shown.

STEP 3.

Place reflector onto Az\El Positioner

Assembly and secure using the Hi-lo

screws provided.

4096-630