CPI 1132 Series Montageanleitung - Seite 6

Blättern Sie online oder laden Sie pdf Montageanleitung für Antenna CPI 1132 Series herunter. CPI 1132 Series 15 Seiten.

Seite drucken

CPI Satcom & Antenna Technologies

1.4

MECHANICAL INSTALLATION TOOLS

The hardware supplied with this antenna system is U.S. SAE standard size.

However, the sizes have been chosen to allow use with compatibly sized metric

wrenches as shown in the table below.

HARDWARE SIZE

5/16" Bolt

1/4" Bolt

3/8" Bolt

1/2" Bolt

Hi-Lo Screw

Also recommended for installation:

Compass - graduated to .5°

Adjustable Wrench

1.5

FOUNDATION INTERFACE

The required interface from the foundation to the mount is 2-1/2" schedule 40

pipe (2.88" O.D.). A suggested in-ground foundation is shown in Figure 1.

Also available from CPI, as options, are a kingpost pedestal mount and a non-

penetrating mast mount.

SAE WRENCH SIZE

1/2"

7/16"

9/16"

3/4"

7/16"

1.2M Ku-BAND Rx/Tx SERIES 1132

METRIC WRENCH

SIZE

13 mm

11 mm

15 mm

19 mm

11 mm

4096-630

MAXIMUM REC.

TORQUE

12 ft-lbs

(16.27 n-m)

6 ft-lbs

(8.14 n-m)

22 ft-lbs

(29.83 n-m)

45 ft-lbs

(61.02 n-m)

10 ft-lbs

(13.56 n-m)