Allied Telesis TurboStack AT-TSA1 Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schalter Allied Telesis TurboStack AT-TSA1 herunter. Allied Telesis TurboStack AT-TSA1 18 Seiten. At-tsax appliqués

Seite drucken
AT-TSAx Appliqués
Location of Appliqué Port
In a TurboStack department concentrator chassis, manageable hubs can be
connected to network zones using different cable media by installing different
appliqués.
To install or remove an appliqué, find the TurboStack hub appliqué port. As shown
in Figure 2, this port is located directly to the left of the RS232 terminal port on the
module faceplate (in this case an AT-TS06F/SC model hub).
RS232 port
Network LEDs
SC port connectors
Appliqué port
(configured as AUI)
Power receptacle
Figure 2: AT-TS06F/SC Faceplate
The appliqué port is convertible on all TurboStack hubs with management. You
may configure it by installing an alternative to the AUI network-interface appliqué
as described below.
3