Avsl QTX U-MIC Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Mikrofonanlage Avsl QTX U-MIC herunter. Avsl QTX U-MIC 4 Seiten. Usb dual handheld uhf wireless system

Seite drucken

Operation

The U-MIC receiver is designed to connect to a microphone input jack on a mixer

or amplifier. Turn down the volume level on the microphone input of the mixer or

amplifier before connecting to avoid loud noises when connecting. Connect the

6.3mm plug end of the supplied lead to the appropriate microphone input jack.

Note: The output of both of the handheld transmitters is mixed to the same

single 6.3mm output.

Each handheld transmitter has an on/off switch (2), which should be in the down

position (off). Unscrew the bottom battery compartment (3) and insert 2 x AA

alkaline batteries, ensuring that the polarity is the correct way around.

Move the switch up to the "on" position and the power indicator (1) should light

briefly. If this LED is lit constantly, this indicates that the batteries are low on

charge and need replacing with new ones.

Gradually turn up the volume level on the mixer or amplifier and speak into the

handheld microphones in turn until the sound can be heard through the speakers

or recording equipment. Increase the volume to the required level.

When one of the microphones is not being used for a short time, it is possible to

mute the output by sliding the on/off switch to the central "mute" position. This

maintains the radio carrier signal but mutes the sound until the switch is moved

back to the "on" position.

If the U-MIC set is not being used for longer periods, turn down the volume level

on the connected mixer or amplifier and switch both handheld microphones off.

For long term storage, unplug the jack and USB receiver and remove the

batteries form the handheld transmitters.

171.808UK, 171.809UK User Manual