2Wire Gateway 100 Series Installationshandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Installationshandbuch für Gateway 2Wire Gateway 100 Series herunter. 2Wire Gateway 100 Series 19 Seiten. Usb driver installation for macintosh computers
Auch für 2Wire Gateway 100 Series: Treiber-Installation (1 seiten)

Seite drucken

Installing and Configuring the Gateway

Windows 98/SE/2K/ME/XP and Macintosh OS 10.2

Congratulations on the purchase of your 2Wire gateway. To install your gateway and configure your home

network, follow these steps.

Note:

Features for different models may vary. Product details will be specified for each particular

model.

Note:

TO MAC OS 9.X AND OTHER OPERATING SYSTEM USERS: Users running Mac OS 9.X

and operating systems other than those stated above must perform a manual configuration of the

gateway. Refer to Appendix C for step-by-step instructions.

Insert the 2Wire Setup Wizard CD and follow the on-screen instructions

Do NOT install any equipment until instructed by the CD during your installation.

Enter key code

If you were provided with a 20-digit key code by your service provider, enter it when prompted. If you were

not provided with a key code, refer to "Appendix E: Back-Up Key Codes" on page 16.

Add computers to your network

Insert the 2Wire Setup Wizard CD into the CD-ROM drive of each computer that you wish to connect to your

network and follow the on-screen instructions.