DGC DC-3000 Series Gebrauchsanweisung - Seite 9

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Messgeräte DGC DC-3000 Series herunter. DGC DC-3000 Series 20 Seiten. Ultrasonic thickness gauge

Seite drucken

DC-3000 SERIES ULTRASONIC THICKNESS GAUGE

【8.4】Measurement mode

There are 2 measuring modes provided, T-E mode and E-E mode .Users

can select different measuring modes according to their requirements and

measuring environments.

Press

into measurement mode setting

Press

to confirm,

Press

to Esc. Menu and into measurement state.

8.4.1.1 T-E Mode:

When the T-E mode is selected, all probes are available, and users can

select following measuring modes:

Standard Measurement:

Display the current value, satisfied with the normal measuring needs.

Minimum Measurement:

Among one measurement, display the point. It is suitable for testing the

curvature surface or needs to get the minimum value which is widely used

in the thickness measurement of pipeline.

Notice: it is not recommended to use this function when measuring cast

iron or alloy materials.

Difference mode: (DC-3020)

Display the accurate differential value between the measured value and

reference value set by the users, suitable for quality check to identifying

the qualified products, whose thickness is in the admissive error.

to select desired measurement mode

- 7 -