Avtec XHD070 Betriebshandbuch - Seite 13
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Monitor Avtec XHD070 herunter. Avtec XHD070 17 Seiten.
Seite druckenXHD070 & XHD070Pro
Operation Manual_V1.0
Function menu
Use one of the
/F1 button to enter the Function menu. Press ▲/F2 or
▼
navigate through the settings. Once the desired setting is highlighted, use the
◄ or ►buttons to navigate through the sub-menu functions. Press the MENU
button to activate the function.
Menu Item:
Center Marker
Safe Frames
Image Freeze
Image Flip
Check Field
P2P (Pixel-to-Pixel)
Focus Assist
Histogram
Exposure (Zebras)
False Colors
AVtec LCD Monitors
Description:
To set center mark (cross mark) display.
To show screen markers; 96%, 93%, 90%, 85%,
80%, 2.35:1 or Off.
Capture the current picture.
Flip the image, horizontally, vertically or in both
directions.
Color overlay; Red, Green, Blue, Mono or Off.
The display mode that made the resolution of the
image consistent with display of the physical
resolution.
Turns on the Focus Assist function that makes it
easier to focus.
Turns on the Histogram in the right corner of the
screen. To check the picture brightness.
(only available in XHD070Pro version)
Turns on Exposure with red stripes to check what
is overexposed.
(only available in XHD070Pro version)
Turns on False Colors to show scene lighting
levels. Red areas are overexposed, blue areas
are insufficient lighting, green areas are good
lighting levels.
(only available in XHD070Pro version)
/F1 to
▼
Page: 11/13