Allied Telesis AT-MC601 Series Datenblatt
Blättern Sie online oder laden Sie pdf Datenblatt für Netzwerk-Router Allied Telesis AT-MC601 Series herunter. Allied Telesis AT-MC601 Series 2 Seiten. Allied telesis at-ar750s: supplementary guide
Auch für Allied Telesis AT-MC601 Series: Broschüre (6 seiten)
Seite drucken
Datasheet |
Media Converters
AT -MC601/2
Extended Ethernet
AT -MC601
Subscriber Unit
AT -MC602
Provider Unit
Extended Ethernet™ Operation
Used as a pair, the AT-MC601 and AT-MC602
provide over 10Mbps of symmetric data
transfer, while supporting POTS service over
phone-grade, twisted-pair, wiring (CAT1, 2, 3) at
distances up to 1.2Km or 4,000 feet.
They are the ideal solution for providing over
10Mbps operation on 'last-mile' twisted-pair
circuits or existing in-building wiring.
Standard Ethernet operation is preserved end-
to-end, retaining VLAN tags, and Ethernet MAC
information across the link, while higher layer
protocols are passed transparently. 10Mbps
Ethernet operation is supported simultaneously
with POTS, ISDN or PBX signalling, without
disruption.
MTU and MDU Applications
Multi-Tenant Units (MTU) such as offices and
campuses, and Multiple Dwelling Units (MDU)
such as hotels and apartments are an ideal
environment for the AT-MC601/2 network
extenders, where phone-grade wiring can be
used to provide broadband access to Internet
services including video streaming, WWW,
gaming and e-mail.There is no need to re-wire
premises with expensive CAT5 or fiber to
provide broadband Ethernet services.
Allied Telesis
over VDSL
TM
Standalone and Rack-mount
The AT-MC602 provider unit is available as a
compact standalone unit for installation at the
central office, or alternatively, it can be rack-
mounted in the standard AT-MCR12 chassis
from Allied Telesis, capable of housing up to
twelve units in one compact chassis with a
redundant power supply, simplifying wiring and
minimizing space requirements.
Plug and Play Operation
Simply connect to the RJ-45 Ethernet port and
the unit will automatically auto-sense and
configure for 10T or 10/100TX, as well as full or
half-duplex Ethernet operation. An integral
POTS splitter means that existing phone
services are not affected - no reconfiguration is
required.
Key Features
•
11Mbps full-duplex Ethernet operation up to
1.2Km or 4,000ft - symmetrical operation
•
Up to 25Mbps downstream asymmetrical
operation
•
Traffic shaping upstream and downstream
•
Both symmetrical and asymmetrical operation
•
Operates over category 1, 2 ,3 or 5 telephone
quality cabling
•
10/100 Ethernet port
•
POTS port
•
Integral POTS splitter
•
Auto MDI/MDI-X
•
Power, Ethernet activity and link LEDs
•
VDSL error and link LEDs
•
GUI configuration tool
•
Standalone, rack-mountable and wall-
mountable
•
Software upgradable
•
Compact form factor
www.alliedtelesis.com