DGP DGP-PG3-V2 Betriebshandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Schleifer DGP DGP-PG3-V2 herunter. DGP DGP-PG3-V2 13 Seiten. Tungsten grinder

Seite drucken

2. SPECIFICATIONS

t
2 . SPECIFICATIONS
Range of Included Angle:
Electrode Diameters:
Minimum Electrode Length: 1.75" ( 44.5mm)
Voltage:
Power Consumption:
Motor:
Length:
Width:
Height:
Weight:

3. WARRANTY

3. WARRANTY
The Piranha III Tungsten Grinder comes with a one-year warranty on parts and labor, excluding the diamond-
grinding wheel that is a consumable part that naturally wears over time. This warranty also excludes abuse to
the machine, dropping of the unit or improper handling by the operator.

4. SAFETY

4
4 . SAFETY
Before any work is done, read the caution below carefully. Working safely prevents accidents.
• When not in use, turn the grinder off for safety purposes and to decrease wear on the machine.
• Wear proper apparel. Do not wear loose clothing, including gloves, neckties, rings, bracelets, or other jewelry,
which may get caught, in moving parts of the machine.
• Wear protective hair covering to contain long hair.
• Wear safety glasses and a facemask.
• Be alert and think clearly. Never operate power tools when tired, intoxicated, or when taking medication that
may cause drowsiness.
• Work area should have sufficient lighting.
• A proper electrical outlet should be available for the tools. A three-prong plug should be plugged directly into
a three-prong outlet. Extension cord should be the correct gauge.
• Keep visitors at a safe distance from work area.
• Always unplug grinder prior to inspection.
• Read this manual thoroughly for specific adjustments and operating procedures.
• Do not perform "make-shift" repairs. Any part that is damaged should be promptly replaced.
• Only use the grinder for its intended purpose. Do not use it for a job it was not designed for.
• Make sure that the grinder is off before plugging it in.
• Do not apply extreme force on the tungsten while grinding. This may cause your grinder to jam or cause pre-
mature grinding wheel wear.
• Never leave the grinder unattended. Turn the grinder off first and do not leave it until it comes to a complete stop.
• Keep hands away from moving parts.
• Know your grinder; learn its operation, applications, and specific limitations.
Copyright©2017, Arc-Zone.com®, Inc. All Rights Reserved
Document: DGP-MANUAL-P3-V2 | DGP-PG3-V2 Product User Manual | Released: 7/11 Rev. C
4 / 13
10° - 60°
.040"(1.0mm), 1/16" (1.6mm), 3/32" (2.4mm),
1/8" (3.2mm), 5/32" (4.0mm) & 3/16" (4.8mm)
115/220 VAC, 50/60Hz, (Configurable)
500 Watts
1/3 hp, 1680 rpm, 5.0 amps
13.5" (342mm)
7.0" (177mm)
9.5" (240mm)
46 lbs (20.87kg)
Arc-Zone.com, Inc.
2091 Las Palmas Drive, Ste. F
Carlsbad, CA 92011 - Tel. 1.760.931.1500
Page 4