Avtech AVT583 Benutzerhandbuch - Seite 14

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Sicherheitskamera Avtech AVT583 herunter. Avtech AVT583 14 Seiten. Speed dome camera

Seite drucken

AUTO TRACKING SETUP

Step1: In the live view, right click to show the main menu.

Select ADVANCED CONFIG  DCCS. Then, select the channel which connects this camera,

and click SETUP to enter the menu of camera parameters.

CAMERA

DETECTION

ALERT

NETWORK

DISPLAY

RECORD

DCCS

NOTIFY

MULTICASTING

EXIT

Step2: Go to AUTO TRACKING, and select SETUP.

Step3: You'll see the setting panel on the bottom left side of the screen:

Icon

Function

Left limit

Right limit

Tilt angle

Zoom ratio

Time

Step4: Right-click to return to the live view, and click the channel with this speed dome camera

connected. Then, click

and select

NOTE: To stop camera panning, click

ADVANCED CONFIG

CH1

CH2

CH3

CH4

SETUP

F.W.

1016

DEVICE

AVTXXX

CONNECTION

Description

Move the slider to where you want to set as the most left side of the surveillance

area, and click

Move the slider to where you want to set as the most right side of the

surveillance area, and click

Move the slider to select the tilt range of the surveillance area.

Move the slider to confirm the zoom ratio you need for the current area.

Set pre-defined tracking timeout of the camera from 5 ~ 60 seconds, or drag

directly to the right end for no time limit (INFINITE).

When the locked target stops moving longer than the pre-defined tracking

timeout, the camera returns to the point it originally monitors after the preset

tracking timeout.

on the bottom left side of the screen to show the PTZ control panel,

to start.

again to escape.

to set.