Avtech DG206A Benutzerhandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Sicherheitskamera Avtech DG206A herunter. Avtech DG206A 6 Seiten. Ir dome camera
Seite druckenINSTALLATION
Step1: Find the screw on the camera, and remove it with the supplied wrench.
Then, remove the camera base as shown in Figure 1, and disassemble the camera to four parts as shown in
Figure 2.
Step2: Locate where you want to install this camera (wall or ceiling), and drill holes on the wall or ceiling for securing the
bracket and routing the cables (if necessary).
Step3: Attach the bracket to the wall (or ceiling), and make sure the cables are routed and arranged properly in the bracket,
as shown in Figure 3.
Step4: Secure the bracket to the wall (or ceiling), as shown in Figure 4.
Step5: Slightly adjust the camera lens to where it's supposed to face, and replace Part 1 and Part 2 back, as shown in
Figure 5 and Figure 6.
Step6: Hold the camera lens and Part 1, rotate only Part 2 clockwise to the end, and replace the screw removed in Step1
back, as shown in Figure 6.
Figure 5
Step7: Power on your camera, and check the viewing angle on the PC.
Step8: Adjust the position, viewing angle, focal length and focus of the
camera, if necessary.
For focal length and focus adjustment, please check Figure 7
to know where to do.
Figure 1
Figure 3
Figure 2
Figure 4
Figure 6
Figure 7