Dell D11S Einrichtung und Spezifikationen - Seite 21

Blättern Sie online oder laden Sie pdf Einrichtung und Spezifikationen für Laptop Dell D11S herunter. Dell D11S 37 Seiten. Small form factor
Auch für Dell D11S: Schnellstart-Handbuch (2 seiten), Einrichtung und Spezifikationen (35 seiten), Benutzerhandbuch (45 seiten), Handbuch für Einrichtung und Spezifikationen (35 seiten), Installationshandbuch (22 seiten), Handbuch für Einrichtung und Spezifikationen (31 seiten)

Seite drucken
Dell D11S Einrichtung und Spezifikationen
Option
Password Change
UEFI Capsule Firmware Updates
TPM 2.0 Security
Absolute
Chassis Intrusion
OROM Keyboard Access
Admin Setup Lockout
SMM Security Mitigation
Description
•
Disabled — Always prompt for the system and internal HDD password when they are set. This
option is enabled by default.
•
Reboot Bypass — Bypass the password prompts on Restarts (warm boots).
NOTE:
The system will always prompt for the system and internal HDD passwords when
powered on from the off state (a cold boot). Also, the system will always prompt for
passwords on any module bay HDDs that may be present.
This option lets you determine whether changes to the System and Hard Disk passwords are
permitted when an administrator password is set.
Allow Non-Admin Password Changes - This option is enabled by default.
This option controls whether this system allows BIOS updates via UEFI capsule update packages.
This option is selected by default. Disabling this option will block BIOS updates from services such as
Microsoft Windows Update and Linux Vendor Firmware Service (LVFS)
Allows you to control whether the Trusted Platform Module (TPM) is visible to the operating system.
•
TPM On (default)
•
Clear
•
PPI Bypass for Enable Commands
•
PPI Bypass for Disable Commands
•
PPI Bypass for Clear Commands
•
Attestation Enable (default)
•
Key Storage Enable (default)
•
SHA-256 (default)
Choose any one option:
•
Disabled
•
Enabled (default)
This field lets you Enable, Disable or Permanently Disable the BIOS module interface of the optional
Absolute Persistence Module service from Absolute Software.
•
Enabled (default)
•
Disabled
•
Permanently Disabled
This field controls the chassis intrusion feature.
Choose any one of the option:
•
Disabled (default)
•
Enabled
•
On-Silent
•
Disabled
•
Enabled (default)
•
One Time Enable
Allows you to prevent users from entering Setup when Admin password is set. This option is not set
by default.
Allows you to enable or disable additional UEFI SMM Security Mitigation protections. This option is
not set by default.
System setup
21