Dell D15S Einrichtung und Spezifikationen - Seite 34

Blättern Sie online oder laden Sie pdf Einrichtung und Spezifikationen für Laptop Dell D15S herunter. Dell D15S 39 Seiten. Small form factor
Auch für Dell D15S: Handbuch für Einrichtung und Spezifikationen (37 seiten), Handbuch für Einrichtung und Spezifikationen (23 seiten), Einrichtung und Spezifikationen (34 seiten), Einrichtung und Spezifikationen (21 seiten), Handbuch für Einrichtung und Spezifikationen (38 seiten)

Dell D15S Einrichtung und Spezifikationen

Maintenance

Table 37. Maintenance
Option
Service Tag
Asset Tag
SERR Messages
BIOS Downgrade
Data Wipe
BIOS Recovery
First Power On Date

System logs

Table 38. System Logs
Option
BIOS events

Advanced configuration

Table 39. Advanced configuration
Option
ASPM
34
System setup
Description
Displays the service tag of your computer.
Allows you to create a system asset tag if an asset tag is not already set.
This option is not set by default.
Controls the SERR message mechanism. This option is set by default. Some graphics cards
require that the SERR message mechanism be disabled.
Allows you to flash previous revisions of the system firmware.
● Allow BIOS Downgrade
This option is set by default.
Allows you to securely erase data from all internal storage devices.
● Wipe on Next Boot
This option is not set by default.
BIOS Recovery from Hard Drive—This option is set by default. Allows you to recover the
corrupted BIOS from a recovery file on the HDD or an external USB key.
NOTE:
BIOS Recovery from Hard Drive field must be enabled.
Always Perform Integrity Check—Performs integrity check on every boot.
Allows you the set Ownership date. The option Set Ownership Date is not set by default.
Description
Allows you to view and clear the System Setup (BIOS) POST events.
Description
Allows you to set the ASPM level.
● Auto (default) - There is handshaking between the device and PCI Express hub to
determine the best ASPM mode supported by the device
● Disabled - ASPM power management is turned off at all time
● L1 Only - ASPM power management is set to use L1