Dell D19M Benutzerhandbuch - Seite 21

System error messages

Table 3. System error messages

System message

Alert! Previous attempts at booting this

system have failed at checkpoint [nnnn]. For

help in resolving this problem, please note

this checkpoint and contact Dell Technical

Support

CMOS checksum error

CPU fan failure

System fan failure

Hard-disk drive failure

Keyboard failure

No boot device available

No timer tick interrupt

NOTICE - Hard Drive SELF MONITORING SYSTEM

has reported that a parameter has exceeded

its normal operating range. Dell recommends

that you back up your data regularly. A

parameter out of range may or may not

indicate a potential hard drive problem

Description

The computer failed to complete the boot routine three

consecutive times for the same error.

RTC is reset, BIOS Setup default has been loaded.

CPU fan has failed.

System fan has failed.

Possible hard disk drive failure during POST.

Keyboard failure or loose cable. If reseating the cable does not

solve the problem, replace the keyboard.

No bootable partition on hard disk drive, the hard disk drive

cable is loose, or no bootable device exists.

•

If the hard drive is your boot device, ensure that the cables

are connected and that the drive is installed properly and

partitioned as a boot device.

•

Enter system setup and ensure that the boot sequence

information is correct.

A chip on the system board might be malfunctioning or

motherboard failure.

S.M.A.R.T error, possible hard disk drive failure.