Dell Inspiron 1018 Service-Handbuch - Seite 29

Blättern Sie online oder laden Sie pdf Service-Handbuch für Laptop Dell Inspiron 1018 herunter. Dell Inspiron 1018 47 Seiten. Service manual
Auch für Dell Inspiron 1018: Service-Handbuch (47 seiten)

Dell Inspiron 1018 Service-Handbuch
Back to Contents Page
  Memory Module
Dell™ Inspiron™ 1018 Service Manual 
  Removing the Memory Module
  Replacing the Memory Module
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
 
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
 
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 
is not covered by your warranty.
 
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
You can increase your computer memory by installing memory modules on the system board. See "Specifications" in the Setup Guide that shipped with your
computer or at support.dell.com/manuals for information on the type of memory supported by your computer.
NOTE:
Memory modules purchased from Dell are covered under your computer warranty.
Your computer has one user-accessible SODIMM connector.
 Removing the Memory Module
 
1. Follow the instructions in
Before You
 
2. Remove the battery (see
Removing the
 
3. Remove the keyboard (see
 
4. Remove the hard-drive assembly (follow the instructions from
 
5. Remove the palm rest assembly (see
 
CAUTION:
To prevent damage to the memory-module connector, do not use tools to spread the memory module securing clips.
 
6. Use your fingertips to carefully spread apart the securing clips on each end of the memory-module connector until the memory module pops up.
1 memory-module connector
2 securing clips (2)
3 memory module
 
7. Remove the memory module from the memory-module connector.
Begin.
Battery).
Removing the
Keyboard).
Removing the Palm Rest
Removing the
step 4
to
step 6
in
Removing the Hard
Assembly).
Battery) before working inside the
Drive).