Dell Latitude 3000 Series Service-Handbuch - Seite 19

Blättern Sie online oder laden Sie pdf Service-Handbuch für Laptop Dell Latitude 3000 Series herunter. Dell Latitude 3000 Series 43 Seiten. 2-in-1
Auch für Dell Latitude 3000 Series: Setup-Handbuch (2 seiten), Benutzerhandbuch (9 seiten), Installieren von Dienstprogrammen und Treibern (4 seiten), Spezifikationen (6 seiten), Technisches Handbuch (45 seiten), Spezifikationen (2 seiten), Handbuch "Erste Schritte (28 seiten), Einbauanleitung (1 seiten), Schnellstart-Handbuch (2 seiten), Einrichtung und Spezifikationen (21 seiten), Handbuch (25 seiten)

Dell Latitude 3000 Series Service-Handbuch
 
3. Remove the floppy drive from the bracket:
a.  Remove all four drive-securing screws (two on each side).
b.  Remove the floppy drive from the bracket.
 

Installing a Floppy Drive

 
1.
Remove the floppy drive bracket
 
2. If you are replacing a floppy drive, remove the drive from the bracket.
 
3. Attach the floppy drive bracket to the floppy drive:
a.  Align the screw holes on the drive with the screw holes on the bracket.
b.  Insert and tighten all four drive-securing screws (two on each side).
 
4. Position the top of the floppy drive bracket so that it is completely flush with the bottom of the upper drive bay, and then slide the floppy drive bracket
forward into position.
NOTE:
The top of the floppy drive bracket has two slots that fit into two clips on the bottom of the upper drive bay. When the floppy drive bracket is
properly mounted, it remains in place without support.
 
5. Secure the floppy drive bracket with the top bracket screw that came with your drive.
 
6. Reattach the
front panel.
 
7. Connect the data cable to the back of the drive and to the floppy drive connector on the
NOTICE:
Match the colored strip on the cable with pin 1 on the drive (pin 1 is marked as "1").
 
8. Reattach the
front
panel.
 
9.
Replace the computer
cover.
from the computer.
system
board.