Dell Latitude 3000 Series Service-Handbuch - Seite 37

Blättern Sie online oder laden Sie pdf Service-Handbuch für Laptop Dell Latitude 3000 Series herunter. Dell Latitude 3000 Series 43 Seiten. 2-in-1
Auch für Dell Latitude 3000 Series: Setup-Handbuch (2 seiten), Benutzerhandbuch (9 seiten), Installieren von Dienstprogrammen und Treibern (4 seiten), Spezifikationen (6 seiten), Technisches Handbuch (45 seiten), Spezifikationen (2 seiten), Handbuch "Erste Schritte (28 seiten), Einbauanleitung (1 seiten), Schnellstart-Handbuch (2 seiten), Einrichtung und Spezifikationen (21 seiten), Handbuch (25 seiten)

3. Press the up- and down-arrow keys to move through the list of devices.

4. Press the spacebar to enable or disable a device (enabled devices have a check mark).

5. Press plus (+) or minus (–) to move a selected device up or down the list.

Clearing Forgotten Passwords

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.

1. Follow the procedures in

Before You

2. Locate the 3-pin password jumper (PSWD) on the

NOTE:

When you receive your computer, the jumper plug is attached to pins 1 and 2.

3. Close the computer cover.

4. Connect your computer and monitor to electrical outlets, and turn them on.

5. After the Microsoft Windows desktop appears on your computer,

6. Turn off the monitor and disconnect it from the electrical outlet.

7. Disconnect the computer power cable from the electrical outlet, and press the power button to ground the system board.

8. Open the computer cover.

9. Locate the 3-pin password jumper on the

10.

Replace the computer

cover.

NOTICE:

To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

Connect your computer and devices to electrical outlets, and turn them on.

Back to Contents Page

Begin.

system board

and attach the jumper plug to pins 2 and 3 to clear the password.

shut down the

system board

and attach the jumper to pins 1 and 2 to re-enable the password feature.

computer.