DGTEC DG-6107IP Gebrauchsanweisung - Seite 10

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Stereo System DGTEC DG-6107IP herunter. DGTEC DG-6107IP 17 Seiten. Mini combo

Seite drucken

PLAYING THE RADIO

Basic operations

1.Press CH+ or CH- button to find a station.

The frequency will change with each press.

When a station's signal is received, it will

appear in the display.

2.To lock onto a station quickly, press PRE/TUN

to tuning state hold the CH+ or CH- button

for two seconds. The unit will start automatic

tuning. When a station is found, automatic

tuning stops.

3. To add a station to memory,press PRE/TUN to

tuning state press the MEMO button.

The memory storage number will blink for

four seconds in the display. Press MEMO

again to store the station.

Memory number

MHZ

Wave band Station frequency

4. To reduce noise when an FM-stereo program

has been received, press the FM mode button. T he

word STEREO will disappear from the display.

The program is now heard in monographic

form, reducing the noise. To resume stereo

play, press the FM mode button again.

OPEN/CLOSE

MUTE

SUBTITLE

LANGUAGE

TITLE

ANGLE

GOTO

+10

DISPLAY

SETUP

ENTER

RETURN

PAUSE/STEP

PLAY

STOP

VOL

FM/MODE PRE/TUN

MEMO

AUTO

SLOW

PROG

REPEAT

A-B

VIDEO

P/N

ZOOM

L/R

DVD

IPOD

USB

SOURCE

Automatic Tuning

This unit will store up to total 50

FM radio stations in its memory.

1.Press the AUTO button. the

automatic tuning mode is activated.

2.Stations will be stored in ascending order

until 50 stations of that particular wave band

have been saved. When a station is stored, the

memory storage number, as well as the station's

frequency, will flash for four seconds in the

display.

Press the TUNER button to select the desired wave band.

1.To play preset stations

2.Press the PRE TUN button.

3.Press any of the numbered buttons to

select the desired station's memory number.

For example, to play the station at memory

#5, simply press the 5 button; for memory

#17, press the 1 button followed by the 7

button.

4.Stations in the memory function may also

be accessed by pressing the CH- or CH+

button.

1.Connecting your iPod to the dock:

Connect you iPod to the dock, make sure right dock adapter is installed before docking your iPod into the machine.

Turn on the player,

select the iPod by pressing

the iPod button on the unit.

[

If the iPod is not inserted into the dock, a "Please insert iPod" message will display on screen.

2.Playing iPod contents on TV:

When your iPod has been properly

verified

, the following will be displayed, The supported menu and screen may vary

depending on the type of iPod connected to the dock. Select the desired menu and press the [ENTER] button on the remote

control to view the contents on your iPod, Selected the file and press the [ENTER] button to play the selected Music.

If iPod is not inserted to dock, a "Please insert iPod" message will display on screen.

Note:

Users can watch the iPod Video content through TV set.

Connecting the Unit to a TV

Composite Video (iPod and DVD) -Connect the video cable from the Video Out jack on the back of the player to the

Video In jack on your television set.

S-Video (iPod and DVD) -For better video quality, connect the player to your television set using an S-Video cable

(not included). Connect the cable from the S-Video Out jack on the back of the player to the S-Video In jack on the

television set.

Video

Setting

Shuffle Songs

3.Music Menu:

Music menu is sorted by playlists, Artists, Albumes, Songs, Genres, Composers.

Select the desived sort arrangemeat and press the [ENTER] button on the remote control.

]

Dock Adapter