Dell Studio XPS 1340 Service-Handbuch - Seite 28

Blättern Sie online oder laden Sie pdf Service-Handbuch für Laptop Dell Studio XPS 1340 herunter. Dell Studio XPS 1340 40 Seiten.

Seite drucken

Back to Contents Page

Wireless Mini-Card

Dell™ Studio XPS™ 1340 Service Manual

Removing the Mini-Card

Replacing the Mini-Card

CAUTION:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface

(such as the back panel) on the computer.

NOTICE:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is

not covered by your warranty.

NOTICE:

To help prevent damage to the system board, remove the main battery (see

inside the computer.

NOTE:

Dell does not guarantee compatibility or provide support for Mini-Cards from sources other than Dell.

If you ordered a wireless Mini-Card with your computer, the card is already installed.

Your computer has three Mini-Card slots:

two Full Mini-Card slots

one Half Mini-Card slot

The types of Mini-Cards supported are:

Wireless Local Area Network (WLAN) — Half Mini-Card

Mobile broadband or Wireless Wide Area Network (WWAN) — Full Mini-Card

Wireless Personal Area Network (WPAN) or Internal Card with Bluetooth

NOTE:

Your computer can only support two Full Mini-Cards and one Half Mini-Card at a time.

NOTE:

The WLAN slot supports a half Mini-Card.

NOTE:

Depending on the configuration of the system when it was sold, one or more of the Mini-Card slots may not have Min-Cards installed in them.

Removing the Mini-Card

1. Follow the instructions in

Before You

2. Remove the base cover (see

3. Disconnect the antenna cables from the Mini-Card.

NOTE:

If you are removing a WPAN Mini-Card, disconnect the blue antenna cable from the Mini-Card.

1 Mini-Card 2 screw 3 antenna cable connectors (2)

Begin.

Removing the Base

Cover).

Before Working Inside Your

Wireless Technology — Full Mini-Card

Computer) before working