Dell Vostro 5390 Handbuch für Einrichtung und Spezifikationen - Seite 31
Blättern Sie online oder laden Sie pdf Handbuch für Einrichtung und Spezifikationen für Laptop Dell Vostro 5390 herunter. Dell Vostro 5390 36 Seiten.
Auch für Dell Vostro 5390: Handbuch für Einrichtung und Spezifikationen (35 seiten)
Seite drucken
POST Behavior
Fn Lock Options
Lock Mode
Pull Screen Logo
Warnings and Errors
Table 38. System setup options—Virtualization menu
Virtualization
Intel Virtualization Technology
VT for Direct I/O
Table 39. System setup options—Maintenance menu
Maintenance
Asset Tag
Service Tag
BIOS Recovery from Hard Drive
BIOS Auto-Recovery
Start Data Wipe
Default: Thorough. Performs complete hardware and configuration initialization during
boot.
Enables or disables the Fn lock mode.
Default: ON.
Default: Lock Mode Secondary. Lock Mode Secondary = If this option is selected, the
F1-F12 keys scan the code for their secondary functions.
Enabled or disabled the computer to display full screen logo if the image match screen
resolution.
Default: OFF.
Selects an action on encountering a warning or error during boot.
Default: Prompt on Warnings and Errors. Stop, prompt and wait for user input when
warnings or errors are detected.
NOTE:
Errors deemed critical to the operation of the computer hardware
will always halt the computer.
Enables the computer to run a virtual machine monitor (VMM).
Default: ON.
Enables the computer to perform Virtualization Technology for Direct I/O (VT-d). VT-
d is an Intel method that provides virtualization for memory map I/O.
Default: ON.
Creates a system Asset Tag that can be used by an IT administrator to uniquely
identify a particular system. Once set in BIOS, the Asset Tag cannot be changed.
Displays the Service Tag of the computer.
Enables the computer to recover from a bad BIOS image, as long as the Boot Block
portion is intact and functioning.
Default: ON.
NOTE:
BIOS recovery is designed to fix the main BIOS block and cannot
work if the Boot Block is damaged. In addition, this feature cannot work in
the event of EC corruption, ME corruption, or a hardware issue. The
recovery image must exist on an unencrypted partition on the drive.
Enables the computer to automatically recover the BIOS without user actions. This
feature requires BIOS Recovery from Hard Drive to be set to Enabled.
Default: OFF.
CAUTION:
This Secure Wipe Operation will delete information in a way that
it cannot be reconstructed.
If enabled, the BIOS will queue up a data wipe cycle for storage devices that are
connected to the motherboard on the next reboot.
System setup
31