Dell Vostro 5470 Handbuch zum Anschluss - Seite 5

Blättern Sie online oder laden Sie pdf Handbuch zum Anschluss für Laptop Dell Vostro 5470 herunter. Dell Vostro 5470 9 Seiten. Notebook pc
Auch für Dell Vostro 5470: Benutzerhandbuch (45 seiten), Informationen zu Einrichtung und Funktionen (5 seiten), Einrichtung und Spezifikationen (29 seiten), Technisches Handbuch (46 seiten)

Table 1. Hybrid Graphics mode

Graphic card type

Discrete GPU

Integradted GPU

Hybrid Graphics mode with Direct Output

To enable Hybrid Graphics mode with Direct Output in the computer's BIOS:

1. Restart the system and immediately press <F2> to enter the BIOS.

2. On the BIOS screen, select Video.

3. Select Switchable Graphics.

4. Select Enable Switchable Graphics.

5. Select Discrete Graphics Controller Direct Output Mode.

6. Save changes and exit the computer's BIOS

For more information about accessing and configuring the BIOS, see the computer's Service Manual at www.dell.com/support.

Table 2. Hybrid Graphics mode with Direct Output

Graphic card type

Discrete GPU

Integrated GPU

To enable Discrete Mode in the computer's BIOS:

1. Restart the system and immediately press <F2> to enter the BIOS.

2. On the BIOS screen, select Video.

3. Select Switchable Graphics.

4. Uncheck Enable Switchable Graphics.

5. Save changes and exit the computer's BIOS

For more information about accessing and configuring the BIOS, see the computer's Service Manual at www.dell.com/support.

Table 3. Discrete Graphics mode

Graphic card type

Discrete GPU

There may be instances where you may want to turn off the computer's internal display to connect more external displays.

You can turn off the LCD display of your computer by using the Intel HD Graphics Command Center.

To turn off the display:

1. In the Windows search bar, type Intel Graphics Command Center and press <Enter>.

2. Accept the Intel Graphics Command Center software licence agreement.

3. On the Intel Graphics Command Center window, click Display. The list of active displays is listed under the Connected

Displays section.

4. Click the ellipsis (...) in the top-right corner of your primary display, then click Extend > Display 2.

5. Click the ellipsis (...) in the top-right corner of display 2, then click Make Display Primary.

6. Click the ellipsis (...) in the top-right corner of your computer's display, then click Disable.

Supported ports

Four Thunderbolt 4

Supported ports

Four Thunderbolt 4

Supported ports

Four Thunderbolt 4

Before you begin