Dell XPS 15 Einrichtung und Spezifikationen - Seite 8

Blättern Sie online oder laden Sie pdf Einrichtung und Spezifikationen für Laptop Dell XPS 15 herunter. Dell XPS 15 19 Seiten. 2-in-1
Auch für Dell XPS 15: Schnellstart-Handbuch (2 seiten), Spezifikationen (4 seiten), Spezifikationen (6 seiten), Schnellstart-Handbuch (2 seiten), Schnellstart-Handbuch (2 seiten), Schnellstart-Handbuch (2 seiten), Einrichtung und Spezifikationen (20 seiten), Schnellstart-Handbuch (14 seiten)

Dell XPS 15 Einrichtung und Spezifikationen
NOTE:
If a USB device is connected to the PowerShare port before the computer is turned off or in hibernate state, you
must disconnect and connect it again to enable charging.
NOTE:
Certain USB devices may not charge when the computer is turned off or in sleep state. In such cases, turn on the
computer to charge the device.
3
HDMI port
Connect a TV or another HDMI-in enabled device. Provides video and audio output.
4
Thunderbolt 3 (USB 3.1 Gen 2 Type-C) port with Power delivery
Supports USB 3.1 Gen 2, DisplayPort 1.2, Thunderbolt 3 and also enables you to connect to an external display using a display adapter.
Provides data transfer rates up to 10 Gbps for USB 3.1 Gen 2 and up to 40 Gbps for Thunderbolt 3. Supports Power Delivery that
enables two-way power supply between devices. Provides up to 5V/3A power output that enables faster charging.
NOTE:
Adapters (sold separately) are required to connect standard USB and DisplayPort devices.
5
Headset port
Connect headphones or a headset (headphone and microphone combo).

Right

1
SD-card slot
Reads from and writes to the SD card.
2
USB 3.1 Gen 1 port with PowerShare
Connect peripherals such as external storage devices and printers.
Provides data transfer speeds up to 5 Gbps. PowerShare enables you to charge your USB devices even when your computer is
turned off.
NOTE:
If the charge on your computer's battery is less than 10 percent, you must connect the power adapter to charge
your computer, and USB devices connected to the PowerShare port.
NOTE:
If a USB device is connected to the PowerShare port before the computer is turned off or in hibernate state, you
must disconnect and connect it again to enable charging.
NOTE:
Certain USB devices may not charge when the computer is turned off or in sleep state. In such cases, turn on the
computer to charge the device.
3
Battery-charge status lights (5)
Turn on when the battery-charge status button is pressed. Each light indicates approximately 20% charge.
4
Battery-charge status button
Press to check the charge remaining in the battery.
5
Security-cable slot (for Noble locks)
Connect a security cable to prevent unauthorized movement of your computer.
8
Views