Allied Telesis Rapier Series Anleitungen

Blättern Sie online oder laden Sie pdf Anleitungen für Netzwerk-Hardware Allied Telesis Rapier Series herunter. Allied Telesis Rapier Series 8 Seiten. How to set up pppoe between a linux client and access concentrator
Auch für Allied Telesis Rapier Series: Handbuch zur Fehlersuche (8 seiten), Fehlersuche (5 seiten), Freigabemitteilung (8 seiten), So konfigurieren Sie (9 seiten)

Seite drucken

Allied Telesis Rapier Series Anleitungen

How To |

Set Up PPPoE Between a Linux Client and an Allied Telesis

Access Concentrator

Introduction

This document describes how to set up PPPoE between a Linux client and an Allied Telesis

device.

What information you will find in this document

This document is divided into the following sections:

•

Configuring your Allied Telesis Device‚ page 2

•

Configuring Your Linux Device‚ page 3

•

Starting the Link‚ page 4

•

Debugging and Verifying‚ page 5

•

Other Hints‚ page 6

Which products and software versions does this information apply to?

•

Products:

Rapier, AT-8800, AT-8900, AT-9900, AT-9800 and SwitchBlade series switches

AR400 and AR700 series routers

•

Software versions: 2.7.1 and later

C613-16074-00 REV B