Allied Telesis 86241-02 Freigabemitteilung - Seite 8

Blättern Sie online oder laden Sie pdf Freigabemitteilung für Software Allied Telesis 86241-02 herunter. Allied Telesis 86241-02 12 Seiten. Patch for rapier switches and ar800 series modular switching routers

Seite drucken

PCR: 02399

Module: TRACE

The Trace utility has been modified. Previously, Trace sent a group of

packets at once and waited for multiple responses in order to assess the

minimum, maximum and average time to cover a certain "hop distance"

towards the target host. Now Trace sends each packet in each group

individually, and waits either for a response or a time-out before sending

the next packet in the group.

PCR: 02401

Module: IPV6

Neighbour discovery and PIM6 caused a fatal error when IPv6 was not

enabled, or when the IPv6 feature license was not present. This issue has

been resolved.

PCR: 02402

Module: SNMP, CORE, SHOW,

FILE

SNMP MIB support has been enhanced for CPU utilisation and file

statistics. MIB support has been added for Allied Telesyn contact details and

fast buffers.

PCR: 02403

Module: STP

A watchdog timeout occurred when the command ENABLE STP PORT was

executed. This issue has been resolved.

PCR: 02406

Module: IPV6

A Router-Alert option has been added. Also, the SHOW IPV6 MLD

INTERFACE command now works correctly.

PCR: 02409

Module: IPG

A warning now appears when the DELETE IP INTERFACE command is

executed before the DELETE DVMRP INTERFACE command.

PCR: 02410

Module: VRRP

VRRP pre-empt mode was not working with advertisement updates of 1

second or more because this did not allow for interface start time on startup.

Now a check is made to verify that interfaces are UP before timers are

started.

PCR: 02411

Module: IPV6

The SHOW TCP command was not showing the listening status for IPv6.

PCR: 02412

Module: IPV6

An ISDN call was activated by IPv6 Router Advertisements over IPv6

tunnel interfaces. This issue has been resolved.

PCR: 02415

Module: IPG

Packets with a RIP source address and next hop address that are not on the

same subnet as the interface will now be processed. If the received next hop

is not on the same subnet, it is treated as 0.0.0.0.

Patch Release Note

Network affecting: No

Patch 86241-02 for Software Release 2.4.1

C613-10340-00 REV B