Dell DL4300 Handbuch für den Einsatz - Seite 29

Blättern Sie online oder laden Sie pdf Handbuch für den Einsatz für Server Dell DL4300 herunter. Dell DL4300 33 Seiten.
Auch für Dell DL4300: Erste Schritte (2 seiten), Erste Schritte mit Ihrem System (2 seiten), Erste Schritte mit Ihrem System (2 seiten)

NOTE: Agents installed on Microsoft Hyper-V Server 2012 operate in the Core edition mode of

Windows Server 2012.

The Agent file downloads.

Click Run in the Installer dialog box.

NOTE: For information about adding agents by using the Core machine, see topic 'Deploying

An Agent (Push Install)' in the Dell DL4300 Appliance User's Guide at dell.com/support/home.

Installing agents on Linux machines

Download the distribution specific 32-bit or 64-bit installer on every Linux server that you want to protect

by using the AppAssure Core. You can download the installers from the AppAssure License Portal at

https://licenseportal.com. For more information, see

NOTE: The security around protecting a machine is based on the Pluggable Authentication Module

(PAM) in Linux. After a user is authenticated using libpam, the user is only authorized to protect the

machine if the user is in one of the following groups:

•

sudo

•

admin

•

appassure

•

wheel

For information on protecting a machine, see the section 'Protecting a Machine' in the Dell DL4300

Appliance User's Guide at dell.com/support/home.

The installation instructions differ depending upon the Linux distribution you are using. For more

information on installing the Linux agent on your distribution, see the following:

•

Installing The Agent On Ubuntu

•

Installing The Agent On Red Hat Enterprise Linux and CentOS

•

Installing The Agent On SUSE Linux Enterprise Server

NOTE: We support these Linux distributions and have tested under most of the released kernel

versions.

NOTE: The Linux Agent installation overwrites any firewall rules that were not applied through UFW,

Yast2, or system-config-firewall.

If you manually added firewall rules, then you must manually add AppAssure ports after the

installation. A backup of existing rules will be written to /var/lib/appassure/backup.fwl.

You must add firewall exceptions to all servers running the AppAssure agent for TCP ports 8006 and

8009 for the AppAssure Core to access agents.

The Linux agent files are located in the following directories for all distributions:

Adding An Agent By Using The License Portal