Dell E05B001 Referenzhandbuch - Seite 26

Blättern Sie online oder laden Sie pdf Referenzhandbuch für Server Dell E05B001 herunter. Dell E05B001 29 Seiten.

Seite drucken

Option

Description

Redundant OS

State

When set to Visible, the backup disk is visible to the boot list and OS. When set to Hidden, the backup

disk is disabled and is not visible to the boot list and OS. This option is set to Visible by default.

Redundant OS

Boot

When set to Enabled, BIOS boots to the device specified in Redundant OS Location. When set to

Disabled, BIOS preserves the current boot list settings. This option is set to Disabled by default.

Miscellaneous Settings

You can use the Miscellaneous Settings screen to perform specific functions such as updating the asset tag and changing the

system date and time.

View Miscellaneous Settings

To view the Miscellaneous Settings screen, perform the following steps:

Steps

1. Turn on, or restart your system.

2. Press F2 immediately after you see the following message:

F2 = System Setup

NOTE:

If your operating system begins to load before you press F2, wait for the system to finish booting, and then

restart your system and try again.

3. On the System Setup Main Menu screen, click System BIOS.

4. On the System BIOS screen, click Miscellaneous Settings.

Miscellaneous Settings details

About this task

The Miscellaneous Settings screen details are explained as follows:

Option

Description

System Time

Enables you to set the time on the system.

System Date

Enables you to set the date on the system.

Asset Tag

Specifies the asset tag and enables you to modify it for security and tracking purposes.

Keyboard

Enables you to set whether the system boots with the NumLock enabled or disabled. This option is set to

NumLock

On by default.

F1/F2 Prompt on

Enables or disables the F1/F2 prompt on error. This option is set to Enabled by default. The F1/F2

Error

prompt also includes keyboard errors.

Load Legacy

Enables you to determine whether the system BIOS loads the legacy video (INT 10H) option ROM from

Video Option

the video controller. Selecting Enabled if the operating system does not support UEFI video output

ROM

standards. This field is available only for UEFI boot mode. You cannot set the option to Enabled if UEFI

Secure Boot mode is enabled. This option is set to Disabled by default.

BIOS and UEFI

NOTE:

This option is disabled if Redundant OS Location is set to None.

NOTE:

BIOS will disable the device in hardware, so it cannot be accessed by the OS.

NOTE:

This option is disabled if Redundant OS Location is set to None or if Redundant OS State is

set to Hidden.

NOTE:

This option does not apply to 84-key keyboards.