Dell E45S003 Referenzhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Referenzhandbuch für Server Dell E45S003 herunter. Dell E45S003 23 Seiten.

Seite drucken

Table 5. Processor Settings details (continued)

Option

Number of Cores per CCD

Processor Core Speed

Processor n

Table 6. Processor n details

Option

Family-Model-Stepping

Brand

Level 2 Cache

Level 3 Cache

Number of Cores

Microcode

SATA Settings

To view the SATA Settings screen, power on the system, press F2, and click System Setup Main Menu > System BIOS >

SATA Settings.

Table 7. SATA Settings details

Option

Embedded SATA

Security Freeze Lock

Write Cache

Port n

Description

Specifies the number of cores per CCD. This option is set to

All by default.

Specifies the maximum core frequency of the processor.

The following settings are displayed for each processor that is

installed in the

system:

Description

Specifies the family, model, and stepping of the processor as

defined by AMD.

Specifies the brand name.

Specifies the total L2 cache.

Specifies the total L3 cache.

Specifies the number of cores per processor.

Specifies the processor microcode version.

Description

Enables the embedded SATA option to be set to Off, AHCI mode , or RAID modes.

This option is set to AHCI Mode by default.

NOTE:

1. You might also need to change the Boot Mode setting to UEFI. Otherwise, you

should set the field to Non-RAID mode.

2. No ESXi and Ubuntu OS support under RAID mode.

Sends Security Freeze Lock command to the embedded SATA drives during POST.

This option is applicable only for AHCI Mode. This option is set to Enabled by default.

Enables or disables the command for the embedded SATA drives during POST. This

option is set to Disabled by default.

Sets the drive type of the selected device.

For AHCI Mode or RAID Mode, BIOS support is always enabled.

Table 8. Port n

Options

Model

Drive Type

NOTE:

Depending on the number of CPUs, there might be

up to n processors listed.

Descriptions

Specifies the drive model of the selected

device.

Specifies the type of drive attached to

the SATA port.

Pre-operating system management applications