Dell EMC PowerEdge MX740c Referenzhandbuch - Seite 16

Blättern Sie online oder laden Sie pdf Referenzhandbuch für Server Dell EMC PowerEdge MX740c herunter. Dell EMC PowerEdge MX740c 29 Seiten. Bios and uefi

Seite drucken
Option
Description
HTTP Device n
Enables you to control the configuration of the HTTP device.
Settings (n = 1 to
4)
UEFI iSCSI
Enables you to control the configuration of the iSCSI device.
Settings
TLS
View and/or modify this device's boot TLS authentication mode. None means the HTTP server and
Authentication
the client will not authenticate each other for this boot. One way means the HTTP server will be
Configuration
authenticated by the client, while the client will not be authenticated by the server. This option is set
to None by default.
Integrated Devices
You can use the Integrated Devices screen to view and configure the settings of all integrated devices including the video
controller, integrated RAID controller, and the USB ports.
Viewing Integrated Devices
To view the Integrated Devices screen, perform the following steps:
Steps
1. Power on or restart the system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click Integrated Devices.
Integrated Devices details
About this task
The Integrated Devices screen details are explained as follows:
Option
Description
User Accessible
Configures the user accessible USB ports. Selecting All Ports Off disables all USB ports; selecting All
USB Ports
Ports Off (Dynamic) disables all USB ports during POST and front ports can be enabled or disabled
dynamically by authorized user without resetting the system.
16
Pre-operating system management applications
Table 1. UEFI iSCSI Settings screen details
Option
iSCSI Initiator Name
iSCSI Device1
iSCSI Device1 Settings
Description
Specifies the name of the iSCSI initiator in IQN
format.
Enables or disables the iSCSI device. When
disabled, a UEFI boot option is created for
the iSCSI device automatically. This is set to
Disabled by default.
Enables you to control the configuration of the
iSCSI device.