Dell EMC PowerEdge MX840c Referenzhandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Referenzhandbuch für Server Dell EMC PowerEdge MX840c herunter. Dell EMC PowerEdge MX840c 29 Seiten.
Seite drucken
Option
Description
System BIOS
Enables you to configure BIOS settings.
iDRAC Settings
Enables you to configure the iDRAC settings.
The iDRAC settings utility is an interface to set up and configure the iDRAC parameters by using UEFI
(Unified Extensible Firmware Interface). You can enable or disable various iDRAC parameters by using
the iDRAC settings utility. For more information about this utility, see Integrated Dell Remote Access
Controller User's Guide at www.dell.com/idracmanuals.
Device Settings
Enables you to configure device settings such as network cards or storage controllers.
System BIOS
You can use the System BIOS screen to edit specific functions such as boot order, system password, setup password, set the
SATA and PCIe NVMe RAID mode, and enable or disable USB ports.
Viewing System BIOS
To view the System Setup screen, perform the following steps:
Steps
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
System BIOS Settings details
About this task
The System BIOS Settings screen details are explained as follows:
Option
Description
System
Specifies information about the system such as the system model name, BIOS version, and Service Tag.
Information
Memory Settings Specifies information and options related to the installed memory.
Processor
Specifies information and options related to the processor such as speed and cache size.
Settings
SATA Settings
Specifies options to enable or disable the integrated SATA controller and ports.
NVMe Settings
Specifies options to change the NVMe settings. If the system contains the NVMe drives that you
want to configure in a RAID array, you must set both this field and the Embedded SATA field on the
SATA Settings menu to RAID mode. You might also need to change the Boot Mode setting to UEFI.
Otherwise, you should set this field to Non-RAID mode.
Boot Settings
Specifies options to specify the Boot mode (BIOS or UEFI). Enables you to modify UEFI and BIOS boot
settings.
Network Settings Specifies options to manage the UEFI network settings and boot protocols.
Legacy network settings are managed from the Device Settings menu.
BIOS and UEFI
5