Dell EMC PowerEdge R7515 Referenzhandbuch - Seite 22

Blättern Sie online oder laden Sie pdf Referenzhandbuch für Server Dell EMC PowerEdge R7515 herunter. Dell EMC PowerEdge R7515 22 Seiten.

Dell Lifecycle Controller

Dell Lifecycle Controller (LC) provides advanced embedded systems management capabilities including system deployment,

configuration, update, maintenance, and diagnosis. LC is delivered as part of the iDRAC out-of-band solution and Dell system

embedded Unified Extensible Firmware Interface (UEFI) applications.

The Dell Lifecycle Controller provides advanced embedded system management throughout the lifecycle of the system. The Dell

Lifecycle Controller is started during the boot sequence and functions independently of the operating system.

NOTE:

Certain platform configurations may not support the full set of features provided by the Dell Lifecycle Controller.

For more information about setting up the Dell Lifecycle Controller, configuring hardware and firmware, and deploying the

operating system, see the Dell Lifecycle Controller documentation at https://www.dell.com/idracmanuals.

The Boot Manager option enables you to select boot options and diagnostic utilities.

To enter Boot Manager, power on the system and press F11.

Table 27. Boot Manager details

Option

Continue Normal Boot

One-shot Boot Menu

Launch System Setup

Launch Lifecycle Controller

System Utilities

You can use the Preboot Execution Environment (PXE) option to boot and configure the networked systems remotely.

To access the PXE boot option, boot the system and then press F12 during POST instead of using standard Boot Sequence

from BIOS Setup. It does not pull any menu or allows managing of network devices.

Pre-operating system management applications

Description

The system attempts to boot to devices starting with the first item in the boot

order. If the boot attempt fails, the system continues with the next item in the

boot order until the boot is successful or no more boot options are found.

Enables you to access boot menu, where you can select a one-time boot device

to boot from.

Enables you to access System Setup.

Exits the Boot Manager and invokes the Dell Lifecycle Controller program.

Enables you to launch System Utilities menu such as Launch Diagnostics, BIOS

update File Explorer, Reboot System.