DH Lifelabs Sciaire+HEPA Gebrauchsanweisung - Seite 7

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Luftreiniger DH Lifelabs Sciaire+HEPA herunter. DH Lifelabs Sciaire+HEPA 9 Seiten.

Seite drucken

Cleaning and Maintenance

When the device is not used for an extended time, store it in a

cool dry place. Do not store the device where it might be exposed

to excess moisture or direct sunlight. The device may not operate

effectively in very low temperatures. The device can be damaged

when exposed to sub-freezing temperatures. Use a dry cloth to clean

the exterior of the device. Do not use any chemicals or cleaners.

Cleaning the Air Quality Sensor

The inlet for the air quality sensor is located at the back of the

machine. Every 2 months you should clean the inlet using a vacuum

or with a cotton swab that has been lightly moistened with clean

water.

Device Specifications

Power Consumption

Input Voltage

Fan Speed

Noise

CADR (clean air delivery rate)

Timer

Material & Finish

Recommended Room Size

Reminder

Dimensions (Machine)

Net Weight

65 Watts

120VAC 60Hz

3 levels (1/2/3) + Sleep Mode

Max. 51 dB

Smoke 294CFM

Dust

288CFM

Pollen 283CFM

2H/4H/8H

ABS, Glossy White & Copper

456 square feet (42.3 m2)

Filter Replacement Reminder:

3-in-1 HEPA filter

13.6 (bottom diameter) x 9.13 (top

diameter) x 35.18 (height) inches

(347*232*893mm)

20.94 lbs (9.5 kg)

Troubleshooting

Symptom

Purifier does

not operate.

Purifier is starting to make

noise and the air output

is low.

AIR QUALITY SENSOR

Air coming from Purifier

has a bad odor.

Air quality does not

improve as the Purifier

operates.

Fan does not operate.

Fan speed does not

change after selecting a

new fan speed.

The appliance is very loud.

The app does not

operate properly or it

is not possible to sync

the purifier with the DH

Lifelabs smartphone

Probable Cause/Solution

Power cord not securely plugged into outlet.

Make sure plug is securely inserted.

No AC power. Check fuse or circuit breaker.

Replace fuse with a time delay type or reset the

circuit breaker.

3-in-1 HEPA filter may be dirty or obstructed.

Replace filter.

The first time you use the Purifier, you might perceive

a plastic or paint smell. This is normal, but it should

disappear quickly. If the smell persists or if you sense

a burning smell, please disconnect the unit and

contact Customer Support.

Windows or doors are open. Constant introduction

of dirty air from outside the room can reduce the

effectiveness of the Purifier. Close all exterior doors

and windows.

Bottom cover is not securely in place. Ensure that

the bottom cover is closed properly, and the filter is

properly installed.

The fan speed will decrease or increase gradually,

this is normal. If fan speed does not change after a

prolonged period of time after changing the setting

contact Customer Support.

Ensure that there are no obstacles near the appliance

and that it has a minimum of 12 inches (30 cm) of

clearance around it for optimal operation.

APP only apply to CAHP-50XX02C Wi-Fi Enabled

model.

If confirmed the device is Wi-Fi Enabled model but

not work, contact Customer Support.

app.