Dell KY0730481 Handbuch für Installation und Inbetriebnahme - Seite 31
Blättern Sie online oder laden Sie pdf Handbuch für Installation und Inbetriebnahme für Server Dell KY0730481 herunter. Dell KY0730481 36 Seiten. Matchprint professional server v3.0 for xerox docucolor 12
Seite drucken
Matchprint Professional Server IIx for Xerox: Hardware Installation and Startup
7.
From the Device drop-down list box, choose either the DocuColor 12 Scanner or the
Spectrocam Device.
8.
From the Media Type drop-down list box, select the media to be calibrated.
9.
From the Media Size drop-down list box, select the media size on which to print the calibration
form.
Note: Transparency media cannot be calibrated.
10.
From the Tray drop-down list box, select the input tray containing the specified media
The input tray can be specified if the user wants to calibrate the media contained in a specific tray
of the DocuColor 12. An Automatic selection chooses the input tray if no input tray is specified. If
Extra Heavyweight or a KODAK POLYCHROME GRAPHICS/Xerox co-branded media, such as
Commercial, is selected, the input tray defaults to Manual Feed. In this case, the user is not able
to change the input tray.
11.
Click on Print Test Form button. A progress bar appears as the form prints:
12.
When the form printing is complete:
•
Go to Calibrating with Scanner for scanner calibration.
•
Go to Calibrating with Spectrocam for Spectrocam calibration.
Note: If the calibration process fails, check to make sure the test page is properly positioned on
the platen. The scanable area is 11"x 17". If the calibration test form is outside this area, calibration
will fail.
2003 Kodak Polychrome Graphics. All rights reserved.
Page 31 of 36