Dell M3S2G8 Handbuch "Erste Schritte - Seite 31

Blättern Sie online oder laden Sie pdf Handbuch "Erste Schritte für Server Dell M3S2G8 herunter. Dell M3S2G8 32 Seiten. Servers for sap hana

Steps

1. Connect to the SHC.

2. Start the SHC:

a. Launch the web browser and enter the standard or secure IP address or host name of the primary module, according to

the settings. The Authentication page opens.

b. Complete the Username and Password fields and click Log On. The System Control page opens.

3. Perform reset operations:

a. From the Maintenance tab, click Maintenance Operations > Unit Reset to open the Reset operations page.

b. Click the required Reset button.

Steps

1. Connect to the SHC.

2. Start the SHC:

a. Launch the web browser and enter the standard or secure IP address or host name of the primary module, according to

the settings. The Authentication page opens.

b. Complete the Username and Password fields and click Log On. The System Control page opens.

3. Check the monitoring sensors:

a. From the Monitoring tab, click Sensor Status to display the Sensor Status page.

b. From the Module tab, select a functional unit tab to display the included sensor values.

Next steps

See the guides in the documentation set for more information.

Steps

1. Connect to the SHC.

2. Start the SHC:

a. Launch the web browser and enter the standard or secure IP address or host name of the primary module, according to

the settings. The Authentication page opens.

b. Complete the Username and Password fields and click Log On. The System Control page opens.

3. Check and clear the System Event Log (SEL):

a. From the Monitoring tab, click System Event Log to open the System Event Log page.

b. Use the Refresh button to update the display at any time.

c. Use the Clear button to empty the log. Entries are deleted and cannot be retrieved.

d. Use the Single Page button or the Multiple Pages button to change the display.

Basic Operations