Dell POWEREDGE 4300 Upgrade-Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Upgrade-Handbuch für Server Dell POWEREDGE 4300 herunter. Dell POWEREDGE 4300 23 Seiten. System board upgrade
Auch für Dell POWEREDGE 4300: Informationen zur Installation (6 seiten), Installationshandbuch (28 seiten), Rack-Einbau (37 seiten), Upgrade-Installationshandbuch (14 seiten), Rack-Einbau (34 seiten), Upgrade-Handbuch (24 seiten), Installationsanleitung Handbuch (12 seiten), Ersatz-Handbuch (3 seiten), Informationen zur Installation (6 seiten), Installationshandbuch (14 seiten)

support.dell.com

This document provides procedures for upgrading the Intel

microprocessors with either Intel Pentium II or Pentium III microprocessors in the

following Dell PowerEdge systems:

PowerEdge 1300

PowerEdge 2300

PowerEdge 4300

PowerEdge 4350

Installing one or more microprocessors in your server may involve the following

activities:

Verifying the basic input/output system (BIOS) revision and saving the current

configuration data

Accessing the system board (see your system's Installation and Troubleshooting

Guide)

Replacing the system board mounting plate or tray (PowerEdge 2300 and 4300)

Installing the upgrade microprocessor

Installing the cooling shroud (if applicable)

Reassembling and checking the system

The upgrade procedure requires a #2 Phillips screwdriver. In addition, you should use

a wrist grounding strap for electrostatic discharge (ESD) protection. Read the safety

instructions in the following section.

Dell PowerEdge Systems — Microprocessor Upgrade

Pentium

II or III

1-1