Dell PowerEdge 6450 Rack-Einbau - Seite 9

Blättern Sie online oder laden Sie pdf Rack-Einbau für Server Dell PowerEdge 6450 herunter. Dell PowerEdge 6450 34 Seiten. Wake-on-lan (wol) support on dell servers
Auch für Dell PowerEdge 6450: Handbuch (10 seiten), Handbuch (15 seiten)

Dell PowerEdge 6450 Rack-Einbau
Before you remove the computer covers, perform the following steps in the sequence
indicated.
1.
Turn off your computer and any devices.
2.
Ground yourself by touching an unpainted metal surface on the chassis, such as
the metal around the card-slot openings at the back of the computer, before
touching anything inside your computer.
While you work, periodically touch an unpainted metal surface on the computer
chassis to dissipate any static electricity that might harm internal components.
3.
Disconnect your computer and devices from their power sources. Also, discon-
nect any telephone or telecommunication lines from the computer.
Doing so reduces the potential for personal injury or shock.
In addition, take note of these safety guidelines when appropriate:
When you disconnect a cable, pull on its connector or on its strain-relief loop, not
on the cable itself. Some cables have a connector with locking tabs; if you are dis-
connecting this type of cable, press in on the locking tabs before disconnecting
the cable. As you pull connectors apart, keep them evenly aligned to avoid bend-
ing any connector pins. Also, before you connect a cable, make sure that both
connectors are correctly oriented and aligned.
Handle components and cards with care. Don't touch the components or con-
tacts on a card. Hold a card by its edges or by its metal mounting bracket. Hold a
component such as a microprocessor chip by its edges, not by its pins.
ix