Dell PowerEdge 6x00 Series Rack-Einbau - Seite 28
Blättern Sie online oder laden Sie pdf Rack-Einbau für Server Dell PowerEdge 6x00 Series herunter. Dell PowerEdge 6x00 Series 34 Seiten. Rack installation guide
Auch für Dell PowerEdge 6x00 Series: Rack-Einbau (37 seiten), Installationshandbuch (37 seiten)
Seite drucken
(Rev. 9/8/00) FILE LOCATION: S:\SYSTEMS\MARCONI\Rackingd\7U\05KCEa00\05KCEeb0.fm
14
Rack Installation Guide
Installing the Cable Tray
Attach the cable tray to the PowerEdge computer chassis using five 6-32 x 0.25-inch
hex-head Phillips screws (see Figure 11).
NOTICE: The cable tray and its mounting are not sturdy enough to support
the weight of the PowerEdge chassis, so do not grasp the cable tray when
lifting the system. You should lift the system only by the chassis edges.
Figure 11. Installing the Cable Tray
Installing the Cable-Management Arm
You can install the cable-management arm on either side of the cable tray. See the
section "Reversing the Cable-Management Arm Installation" found later in this guide.
1.
Facing the back of the rack cabinet, attach the right-angle bracket of the cable-
management arm to the cabinet's back vertical rail and secure it with the captive
thumbscrews (see Figure 12). The bracket slides into the square mounting holes
on the vertical rail.
DELL CONFIDENTIAL - Preliminary
cable tray
6-32 x 0.25-inch hex-head
Phillips screws (5)
9/8/00