Allied Telesis AT-9800 Series Anleitungen - Seite 5

Blättern Sie online oder laden Sie pdf Anleitungen für Software Allied Telesis AT-9800 Series herunter. Allied Telesis AT-9800 Series 8 Seiten. How to set up pppoe between a linux client and access concentrator
Auch für Allied Telesis AT-9800 Series: Freigabemitteilung (5 seiten), So konfigurieren Sie (9 seiten), Handbuch zur Schnellinstallation (12 seiten)

Allied Telesis AT-9800 Series Anleitungen
Debugging and Verifying
Apart from PING, you can also check the following on your linux PC:
[root@linux_client michael]# ifconfig
ppp0 Link encap:Point-to-Point Protocol
[root@linux_client michael]# ps ax | grep ppp
4747 ?
4748 ?
4769 pts/0
[root@linux_client michael]# pppstats
IN
310
On your Allied Telesis device, you can check the following:
ena ppp templ=1 debug=decode
ena ppp templ=1 debug=all
show ppp
show ppp pppoe
Set Up PPPoE Between a Linux Client and an Allied Telesis Access Concentrator
inet addr:192.168.0.1
UP POINTOPOINT RUNNING NOARP MULTICAST
RX packets:7 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0
S
S
R
PACK VJCOMP
VJUNC
7
0
P-t-P:192.168.0.254
0:00 /usr/sbin/pppd pty pppoe -I eth1
0:00 pppoe -I eth1
0:00 grep ppp
VJERR
|
0
0
|
Mask:255.255.255.255
MTU:1492
Metric:1
OUT
PACK VJCOMP
322
8
0
VJUNC NON-VJ
0
8
5