Dell PowerEdge R620 Handbuch - Seite 11

Blättern Sie online oder laden Sie pdf Handbuch für Server Dell PowerEdge R620 herunter. Dell PowerEdge R620 11 Seiten. Poweredge series
Auch für Dell PowerEdge R620: Handbuch "Erste Schritte (12 seiten), Einbauanleitung (2 seiten), Einbauanleitung (2 seiten), Portfolio-Handbuch (27 seiten), Handbuch "Erste Schritte (10 seiten), Handbuch für Installation, Wartung und Fehlersuche (48 seiten)

Cable Routing Procedures for Dell PowerEdge R620 Systems

Section 4: Cabling a PowerEdge R620 system installed on static

rails

NOTE: The CMA is compatible only with the sliding rails, not the static rails.

1. Follow the instructions contained in the Rack Installation Instructions found in the static rail kit to

install the server into a two-post or four-post rack.

2. Install the hook-and-loop straps provided in the rail kit through the slots in the rear brackets of the

rails as described in the Rack Installation Instructions. If the slots in the rails are not accessible

due to the depth of the system and/or the spacing of the rack mounting flanges, install the hook-

and-loop straps onto the rack frame as shown in Figure 11.

3. Connect all applicable cables to the rear of the system and verify that all connections are secure.

4. Using the hook-and-loop straps, bundle the cables and secure them to either the left rail or right

rail as described in the Rack Installation Instructions. See Figure 11 for an example of data cables

secured to the left rail and power cables secured to the right rail (as viewed from the rear of the

system).

Figure 11.

Cabling a system installed in static rails

Install the hook-and-loop straps

onto the rack frame if the slots

in the rails are not accessible