EARTHBOARD EBII Einrichten - Seite 3

Blättern Sie online oder laden Sie pdf Einrichten für Musik-Pedal EARTHBOARD EBII herunter. EARTHBOARD EBII 3 Seiten.

For battery power, 1 or 2 Battery Tethers plug

into the Battery Port(s). 2 Battery Tethers are used with the

Power Pack XL,

available when purchasing your EARTHBOARD

or via our accessory option. The Power Pack XL provides higher

power capacity to the EARTHBOARD.

Plug in an AC Adapter to either Power Port on the right side. Power

can also be used to power a floor pedal (as shown) or to connect

power to another EARTHBOARD.

Wide pedal using

A Dummy Boot & an ISO Boot for

isolation.

Cross Board Audio Patch Cable jacks on each side to interconnect top and bottom rows.

Wide pedal using

A Dummy Boot & an ISO Boot for

isolation.

Each effects pedal sits on a

(Ensure the

RED

feet are on the rail with the

the Gravity Boot to the pedal for power. For wide pedals that need more support, you can use a

Boot

is exactly like a Gravity Boot, except it has no power circuit. If you have an extra Gravity Boot, you can use that as well.

These are available for purchase as an accessory.

Gravity Boot.

The Gravity boot has magnetic feet and attaches to the steel rails of the EBII-SR.

red dot

on the left.) The

Typical EBII setup

Gravity Boot Tether

is the cable that connects

Dummy Boot.

Use your

LifeLine

to power a floor

Pedal. Note: You

can also power

another board

with this

method!

Dummy

The