Dell VxRail S670 Installations- und Wartungshandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Installations- und Wartungshandbuch für Server Dell VxRail S670 herunter. Dell VxRail S670 40 Seiten.
Auch für Dell VxRail S670: Installations- und Wartungshandbuch (35 seiten)

Seite drucken
Item
Ports, panels, or slots
4
PCIe expansion card riser
2 (slot 4 and slot 5)
5
USB 2.0 port (1)
6
PCIe expansion card riser
4 (slot 7)
7
Power supply unit (PSU
2)
8
VGA port
9
USB 3.0 port (1)
10
iDRAC dedicated port
11
System identification
button
12
OCP NIC port
13
NIC port (1,2)
14
Power supply unit (PSU 1)
For more information about supported drives, see the Dell VxRail™ P670F, P670N, V670F, and S670 Technical Specifications.

Inside the system

The following figure and list contains components inside the system:
Icon
Description
N/A
The expansion card riser enables you to connect PCI Express
expansion cards. For more information about the expansion cards
supported on your system, see the Dell VxRail™ P670F, P670N,
V670F, and S670 Technical Specifications.
This port is USB 2.0-compliant.
N/A
The expansion card riser enables you to connect PCI Express
expansion cards. For more information about the expansion cards
supported on your system, see the Dell VxRail™ P670F, P670N,
V670F, and S670 Technical Specifications.
For more information about the PSU configurations, see the Dell
VxRail™ P670F, P670N, V670F, and S670 Technical Specifications.
For more information about the VGA, see the Dell VxRail™ P670F,
P670N, V670F, and S670 Technical Specifications.
This port is USB 3.0-compliant.
Enables you to remotely access iDRAC. For more information, see the
iDRAC User's Guide at www.dell.com/poweredgemanuals.
Press the system ID button:
● To locate a particular system within a rack.
● To turn the system ID on or off.
To reset iDRAC, press and hold the button for more than 16 s.
● To reset iDRAC using system ID, ensure that the system ID
button is enabled in the iDRAC setup.
● If the system stops responding during POST, press and hold the
system ID button (for more than 5 s) to enter the BIOS progress
mode.
N/A
This port supports OCP 3.0. The NIC ports are integrated on the
OCP card which is connected to the system board.
The NIC ports are embedded on the LOM card that is connected to
the system board.
For more information about the PSU configurations, see the on
product documentation page.
System overview
13