Dell Wyse Z90DW Installationshandbuch - Seite 17

Blättern Sie online oder laden Sie pdf Installationshandbuch für Server Dell Wyse Z90DW herunter. Dell Wyse Z90DW 18 Seiten. Z class cloud clients
Auch für Dell Wyse Z90DW: Installationshandbuch (24 seiten), Schnellstart-Handbuch (6 seiten), Schnellstart-Handbuch (8 seiten), Schnellstart-Handbuch (8 seiten), Schnellstart-Handbuch (8 seiten), Schnellstart-Handbuch (6 seiten), Schnellstart-Handbuch (6 seiten), Schnellstart-Handbuch (8 seiten), Schnellstart-Handbuch (6 seiten), Schnellstart-Handbuch (6 seiten)

Installing WES7p Firmware

Step 7: Obtain a Firmware Update

After converting your thin clients, obtain any available firmware update at

http://www.wyse.com/serviceandsupport/support/downloads.asp.

WARNING: Use of the Software on more than one device requires that you first

purchase from Dell additional copies of, or licenses to, the Software. Contact your local

Dell distributor or Dell Inside Sales at 1-800-800-9973 option 1 or 1-408-473-1200

option 1.

Troubleshooting

This section contains general troubleshooting information.

Due to different manufacturing processes on USB keys (and the variety of them), not all

brands have been tested with the Wyse USB Firmware Tool. If you experience problems

booting from a configured USB key, it is recommended that you try a different brand of

USB key.

Problem: How can I properly use a SanDisk Cruiser flash drive to image supported

devices using the Wyse USB Firmware Tool? (KB17735)

Solution: SanDisk flash drives come with support for U3 (for details on U3, see

http://www.u3.com). When you initially use these drives, you are prompted to select the

use for the drive: Apps and Storage or only Storage. If you select the Apps and Storage

option, the drive will create two partitions, one of which is identified as a CD and is a

read only partition. This partition sometimes prevents the Wyse USB Firmware Tool to

properly prepare the USB key for imaging a device. To resolve this problem you can do

one of the following:

•

Go to http://www.sandisk.com, search in the SanDisk Knowledge Base for document

2550, and then follow the instructions in the documentation.

Go to http://www.sandisk.com/DriverDownload/driverList.asp, select USB Flash Drives

from the Select Product Type list, click Find Driver, select U3 LaunchPad Remover,

click Continue, and then download and use the U3 Launchpad Remover according

to the instructions.