Dell Wyse Z90S7 Installationshandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Installationshandbuch für Server Dell Wyse Z90S7 herunter. Dell Wyse Z90S7 18 Seiten. Z class cloud clients
Auch für Dell Wyse Z90S7: Installationshandbuch (24 seiten), Schnellstart-Handbuch (6 seiten), Schnellstart-Handbuch (8 seiten), Schnellstart-Handbuch (8 seiten), Schnellstart-Handbuch (8 seiten), Schnellstart-Handbuch (6 seiten), Schnellstart-Handbuch (6 seiten), Schnellstart-Handbuch (8 seiten), Schnellstart-Handbuch (6 seiten), Schnellstart-Handbuch (6 seiten)

Chapter 2

4. Place your thumbs on the top surface above where the end screws were removed.

Figure 3 Unlatching the cover

5. (a) Grasp the overhanging cover edge and raise the edge

Figure 4 Removing the cover

6. Remove the cover to expose the flash module, as shown in Figure 5.

With a continuous motion, push firmly downward and towards the back panel

(pushing down unlatches the hooks under the cover). The cover will shift

approximate 1/4 inch to hang over the back panel, as shown in Figure 3.

about 1-1/2 inches, and then (b) pull the cover out towards the back panel at the

same angle to free the opposite end of the cover from the remaining hooks, as

shown in Figure 4.

WARNING: Flash modules may be susceptible to damage by Electro-Static

Discharge (ESD). All industry-standard cautions should be followed to avoid ESD.

Before you remove or install a module, touch any metal part of the chassis and keep

that contact with the chassis during the installation process.