Dell D1920 Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Monitor Dell D1920 herunter. Dell D1920 9 Seiten. Dell computer monitor user manual

PRECAUTIONS

Information for users applicable in United States of America

LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE

RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR

FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE ELECTRONIC

INDUSTRIES ALLIANCE AT WWW.EIAE.ORG. FOR LAMP SPECIFIC

DISPOSAL INFORMATION CHECK WWW.LAMPRECYCLE.ORG.

Installation

1. Do not cover or block the ventilation ports on the rear of the monitor.

2. Do not install the monitor close to heat sources such as radiators or air ducts, or in a

location exposed to direct sunlight, excessive dust, mechanical vibration,or shock.

3.The apparatus shall only be used between 5° tilted forward and 15° tilted backward as

normal operation position. If the tilt angle exceeds 15°, it shall be used for wall

mounting or packaging only.

1.Use the correct power cord for your local voltage.

2.Use an accessible outlet close to the monitor.

3.Do not allow anything to rest on the power cable.

4.Only use the power adapter attached to the monitor.

5.Disconnect the power cable from the power supply if:

5.1 You will not use the monitor for an extended period.

5.2 The cable is damaged or frayed.

5.3 The monitor has been dropped or the cabinet damaged.

5.4 A distinct change in performance indicates a need for servicing.

1.Clean the cabinet and controls with a soft cloth lightly moistened with a mild detergent

solution. Do not use any abrasive materials or solvents such as alcohol or benzene.

2.Do not rub, touch, or tap the surface of the screen with sharp or abrasive items such as

pens or screwdrivers, as the screen may scratch.

3.Do not insert objects or spill liquids into the ventilation ports on the monitor's rear, as

fire, electric shock, and / or unit failure may result.

1.When carrying the display for repair or service, disassemble the monitor and pack in its

original packing. To disassemble the neck and base, press the "release button" located

on the back of the neck and detach the neck/base, then remove the base from the neck

by pressing the "release tabs" located under the base plate and pull the neck off the

base, finally use the original carton and packing materials to wrap the display and its

accessories.

- 1 -