Dell E1912H Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Monitor Dell E1912H herunter. Dell E1912H 32 Seiten. User's guide
Auch für Dell E1912H: Maßzeichnung (1 seiten), Setup-Handbuch (2 seiten)

Seite drucken
Dell E1912H Benutzerhandbuch
Operating
l
Non-operating
l
Humidity
Operating
l
Non-operating
l
Altitude
Operating
l
Non-operating
l
Thermal dissipation

Plug and Play Capability

You can install the monitor in any Plug and Play compatible system. The monitor automatically provides the computer with its Extended Display Identification Data
(EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. Most monitor installations are automatic.
You can select different settings if required.
 LCD Monitor Quality & Pixel Policy
During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed pixel that
appears as an extremely tiny dark or bright discolored spot.When the pixel remains permanently lit, it is known as a "bright dot." When the pixel remains black, it is
known as a "dark dot."
In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability. A display with 1 to 5 fixed pixels is considered normal and
within competitive standards.  For more information, see Dell Support site at: support.dell.com.

Maintenance Guidelines

Caring for Your Monitor

CAUTION:
Read and follow the
CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet. 
For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:
To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the
l
antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.
Use a slightly dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics.  
l
If you notice a white powder when you unpack your monitor, wipe it off with a cloth. This white powder occurs during the shipping of the monitor.
l
Handle your monitor with care as a darker-colored monitor may scratch and show white scuff marks more than a lighter-colored monitor.  
l
To help maintain the best image quality on your monitor, use a dynamically changing screen saver and power off your monitor when not in use.
l
  
Back to Contents Page
 
0 ° C to 40 ° C (32 ° F to 104 ° F) 
Storage: -20 ° C to 60 ° C (-4 ° F to 
140 ° F)
Shipping: -20 ° C to 60 ° C (-4 ° F to 
140 ° F)
 
10 % to 80 % (non-condensing)
Storage: 5 % to 90 % (non-
condensing)
Shipping: 5 % to 90 % (non-
condensing)
 
3,048 m (10,000 ft) max
10,668 m (35,000 ft) max
75.09 BTU/hour (maximum)
61.43 BTU/hour (typical)
safety
instructions before cleaning the monitor.