ensto AVR66 Series Betriebsanleitung - Seite 5
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Sicherheitssensoren ensto AVR66 Series herunter. ensto AVR66 Series 6 Seiten. Hf radar sensor
Auch für ensto AVR66 Series: Installations- und Betriebsanleitung (4 seiten)
Seite drucken
4. TEKNISKA UPPGIFTER
Nödljusarmatur
AVR320.110L/1M
AVR320.1105DL/1M
AVR320.114L/1M
AVR320.1145DL/1M
AVR400.118L/1M
AVR400.1185DL/1M
AVD370.114L/1M
AVD370.1145DL/1M
AVD370.118L/1M
AVD370.1185DL/1M
AVR66.120L/1M
AVR66.1205DL/1M
Nödljusarmaturens funktionstid: 1 h
Drifttemparatur område:
Teknisk hjälp: +46 8 556 309 00
1. GENERAL INFORMATION
ENG
A self-contained emergency luminaire.
2. INSTALLATION
WIRING
Connect the luminaire according to picture 1. Connect the unconnected red wire in the battery case to
the + -terminal of the battery, see pic. 2. Write the commissioning date of a battery on the label, see pic. 2.
Connect the supply voltage to the normal lighting group. The green LED light burns and shows that the
battery is charging. The module will automatically charge the battery unit over the next 20 hour period.
Check the functioning of the emergency unit by switching off both the normal lighting group and the
emergency lighting group. The light source of the luminaire shall burn and the green LED light shall be off.
MARKINGS
The markings on the label indicate the operating mode of the luminaire:
X
1
60
60 = duration of emergency mode in minutes
1 = maintained emergency luminaire
X = self-contained emergency luminaire
Ljuskälla
Batteri
1 x 10W LED
NiCd 3,6V / 1,6 Ah
1 x 10W LED
NiCd 3,6V / 1,6 Ah
1 x 10W LED
NiCd 3,6V / 1,6 Ah
1 x 10W LED
NiCd 3,6V / 1,6 Ah
1 x 18W LED
NiCd 3,6V / 1,6 Ah
1 x 18W LED
NiCd 3,6V / 1,6 Ah
1 x 18W LED
NiCd 3,6V / 1,6 Ah
1 x 18W LED
NiCd 3,6V / 1,6 Ah
1 x 18W LED
NiCd 3,6V / 1,6 Ah
1 x 18W LED
NiCd 3,6V / 1,6 Ah
1 x 20W LED
NiCd 3,6V / 1,6 Ah
1 x 20W LED
NiCd 3,6V / 1,6 Ah
-5...+25 oC
BLF
0,35
0,35
0,27
0,27
0,19
0,19
0,27
0,27
0,19
0,19
0,15
0,15
5