Dell DX6012S Benutzerhandbuch - Seite 23

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Lagerung Dell DX6012S herunter. Dell DX6012S 46 Seiten. Rack installation instructions — static rails
Auch für Dell DX6012S: Ergänzendes Handbuch (4 seiten), Hardware-Installationsanleitung (2 seiten), Handbuch zur Einrichtung und Konfiguration (43 seiten), Installations- und Konfigurationshandbuch (35 seiten), Handbuch "Erste Schritte (28 seiten), Hinweis (28 seiten), Hinweis (20 seiten), Übersicht (19 seiten), Konfigurationshandbuch (9 seiten), Konfigurationshandbuch (9 seiten), Freigabemitteilung (8 seiten), Konfigurationshandbuch (7 seiten), Freigabemitteilung (6 seiten), Freigabemitteilung (5 seiten), Anmerkungen zur Veröffentlichung (5 seiten), Handbuch "Erste Schritte (47 seiten), Einrichtung (2 seiten), Rack-Einbau (2 seiten)

Cabling the Appliance

Locate the Dell DX6axyS Getting Started Guide that shipped with your

system and follow the instructions to attach the power cables and network

cables to the DX6axyS system. Connect the network ports to the cluster's

private network on the same IP subnet as the other storage nodes. The DX

Storage Node is preconfigured to network boot from the DX Cluster Services

Node and the NIC ports are preconfigured in balanced-alb modes.

After cabling the storage node, turn it on, and verify that the network boot is

successful.

NOTE:

If the network boot is not successful, verify that the cables are correctly

connected to the private network.

The DX Storage Cluster capacity is licensed. To expand the cluster capacity,

you must purchase a capacity license. When you purchase a capacity license,

you receive a capacity license card that contains an activation code. Enter the

activation code in the DX Cluster Services console to enable the additional

cluster capacity.

NOTE:

The capacity is only applicable to the cluster in which it is entered.

To activate the additional capacity, follow the instructions in the Cluster

Services Node Installation and Configuration Guide.

You can add additional network adapters to the DX Storage Nodes to expand

the network bandwidth to the storage nodes. To add additional network

adapters:

1 Turn off the DX Storage Node.

2 Follow the steps to add a network adapter in the Dell DX6axyS system

Hardware Owner's Manual.

3 Connect the Ethernet ports to the private network.

4 Turn on the DX Storage Node.

The DX Storage Node is automatically configured with all network ports bonded.

Setting Up the DX Object Storage Platform