Dell E11J Benutzerhandbuch - Seite 37

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Lagerung Dell E11J herunter. Dell E11J 45 Seiten. Storage center
Auch für Dell E11J: Handbuch "Erste Schritte (7 seiten), Benutzerhandbuch (39 seiten)

Seite drucken

Figure 27. Replacing a Storage Controller

Storage controller

Locate the battery removed in a previous step and insert it into the replacement storage controller.

a. Align the battery with the slot on the storage controller.

b. Slide the battery into the storage controller until the release tab clicks into place.

Insert the replacement storage controller into the chassis until it is fully seated.

Reconnect all the cables to the left storage controller.

10. Push the release lever toward the chassis until it clicks into place. The storage controller is powered

on.

NOTE: When a storage controller is powered on, there is a one‐minute delay while the storage

controller prepares to boot. During this time, the only indication that the storage controller is

powered on are the LEDs on the storage controller. After the one‐minute delay, the fans and

LEDs turn on as an indication that the storage controller is starting up.

11. In the Dell Storage Client, make sure that the replacement storage controller is recognized and

shown as up and running.

NOTE: If the Storage Center software on the replacement storage controller is older than the

software on the existing storage controller, the storage system updates the replacement

storage controller with the software version on the existing storage controller. The Storage

Center software update on the replacement storage controller may take from 15 to 45 minutes

to complete.

12. Clear the swap status for the temperature sensor and I/O module.

a. Click the Hardware tab.

b. In the Hardware tab navigation pane, expand the enclosure.

c. Select Temperature Sensors.

Replacing SCv2080 Components

Get other manuals https://www.bkmanuals.com

Release level